KISS ESC 3-6s 50A 4in1 32bit brushless Motor Ctrl
Please see below for delivery times.
KISS ESC 3-6s 50A 4in1 32bit brushless Motor Ctrl
KISS ESC 3-6s 50A by Livyu FPV
Technical Data
32-bit ARM Cortex M4 MCU
Operating voltage 6 - 26V / 2-6S Lipo
When using 5-6S, a low ESR capacitor of at least 470μF is required, ideally 1000μF and at least 35V, ideally 50V
Maximum continuous current output 50A per individual ESC, actively limited
Maximum rotational error speed 600000 ERPM (we recommend 500000 ERPM)
Dimensions 40 x 45mm
Hole spacing 30.5mm
Hole size 3.2mm
Hardware/Feature Specifications
Telemetry-capable (voltage, current, temperature, RPM)
Active current limitation (constant current measurement and limitation at 50A maximum)
Active temperature monitoring (actively reduces performance from 100°C)
Sinwave/BackEMF Hybrid conversion for cleaner running
Dshot 2400 (Full resolution of 2000 steps requires only 6.5µs)
Supports all common Dshot commands such as Turtle Mode, 3D Mode and direction change
Advanced adaptive auto-timing (3.25-30° adjustment with each conversion)
Built for race quads (50A per individual ESC continuous load possible even with weak cooling)
High maximum speed! (500,000ERpm, 71,400Rpm with a 14 pole motor)
Accurate speed control (2000 steps with DShot)
No additional capacitors needed for 2-4S
Super fast speed acceptance
Precise speed acceptance
Active "free-spinning" (very low diode losses)
Regenerative braking (Active Braking)
Supports 3-6S Lipo
Dshot 100-2400, Oneshot42, Oneshot125 as well as (25 – 500Hz) PWM with automatic detection
Supports the following protocols: FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL as well as the following telemetry protocols; S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus
KISS ESC 50A 4in1 German - The geman manual for the KISS ESC 50A 4in1
KISS ESC 50A 4in1 English - The english manual for the KISS ESC 50A 4in1
KISS ESC 50A 4in1 Firmware - The firmware for the KISS ESC 50A 4in1
KISS GUI Software KISS GUI - Standalone Kiss GUI Software